Now Available – Precision Cut Slider Gaskets / Dust Protectors for Juno 106, SH-101, Juno 60, Jupiter 8 and more!

Roland Juno 106 slider gasket / dust protectors set
Roland Juno 106 slider gasket / dust protectors set

One thing we find in almost every 1980s Roland we work on is crumbly, dirty “dust shields” or “dust protectors” on the sliders (aka faders) of the panel board. These gaskets were cut from thin black EVA foam sheets and were meant to protect the sliders from dust. However, 35 years later, they have dried out and are falling apart in every Juno 106, their fragments actually falling into the sliders and making their crackly and intermittent behavior much worse.

Bell Tone Synth Works now offers laser-cut replacement gasket sets for the Roland Juno 106, SH-101, Juno 60 and Juno 6, Jupiter 8, and CompuRhythm CR-78, which you can purchase online here in our Shop. These slider gaskets are made to exact specifications on a professional laser cutter out of 1.5mm stiffened and resin-bonded black acrylic felt which does¬†not¬†shed fibers like other forms of felt. Continue reading “Now Available – Precision Cut Slider Gaskets / Dust Protectors for Juno 106, SH-101, Juno 60, Jupiter 8 and more!”

“Kiwi-8P” Roland JX-8P Upgrade (and a Kiwi 106)

"Kiwi 8P" upgraded Roland JX-8P
“Kiwi 8P” upgraded Roland JX-8P

I did the Kiwi 8P upgrade on this Roland JX-8P this week and just by coincidence did a Kiwi 106 just last week as well. These are very deep and powerful synth upgrades designed by a New Zealand-based company called Kiwitechnics, and they have similar ones available for a few other 80s polysynths. Continue reading ““Kiwi-8P” Roland JX-8P Upgrade (and a Kiwi 106)”

Juno 60 (#2) and Junoes 106 (#12,13)

Roland Juno 60

We had a week full of Junos (Junoes?), with three Juno 60s and four Juno 106es here all at once. These are the ones I did last week in between grinding away at various aspects of an insane Minimoog Model D restoration I’m working on and building a new power supply for a Rhodes Chroma.

some more Juno 106es

Continue reading “Juno 60 (#2) and Junoes 106 (#12,13)”

Roland Juno 106 #10 (extreme makeover, synth edition)

Roland Juno 106 restoration before and after
before and after

(Now for sale in our Reverb shop!) (Sold)

I bought this busted Juno from a guy who was a mover who got it as a tip on a moving job! It was the dirtiest Juno I’ve ever seen. Continue reading “Roland Juno 106 #10 (extreme makeover, synth edition)”

Roland RS-09

A bedraggled Roland RS-09
A bedraggled Roland RS-09

This RS-09 died in a basement flood and has rusty bubbles all over its panel. It has a helpful piece of masking tape labeling the notes on the keyboard with their note names. We were tasked with fixing it basically for as little money as possible, but the only thing we could have done but didn’t do was make it look nicer. Continue reading “Roland RS-09”

Roland Juno 106 (#8) – common problems with the Juno chorus

Roland Juno 106
yet another Juno 106

Since I always do pretty much the same work on every Juno and have posted about it 7 times, this time I’m going to go more into depth about two specific, very common problems a Juno 106 chorus/jack board can have. Continue reading “Roland Juno 106 (#8) – common problems with the Juno chorus”

Roland Juno 106 (#7) – this is New Jersey

Roland Juno 106
Roland Juno 106

Sold! Now FOR SALE in our Reverb shop!

I bought this Juno from a guy named Mike in South Jersey, with a shaved head and a gold chain. I met up with him at his garage studio behind a roller rink, where the Juno had been used for over 25 years by musicians providing live accompaniment for the roller skaters. Now the music is performed by two “old cowboys” (his words) on two Hammond console organs. I also met Mike’s overweight English bulldog, who he introduced to me as his girlfriend. I think her name was Bethany. Continue reading “Roland Juno 106 (#7) – this is New Jersey”