Quasimidi Polymorph (#3) – our Polymorph repair and rebuild service

quasimidi polymorph repair
another Quasimidi Polymorph (!)

This is the third Quasimidi Polymorph I have rebuilt in the past six months, and the second that I have done for out-of-state clients who contacted me after searching for “quasimidi polymorph repair” (see what I did there?) and coming across my first post about it. The Polymorph is not a vintage synth nor a very common synth, but it is a very powerful and unique synth that is much beloved by its owners, and at around 15 years old at this point, pretty much every Polymorph out there now suffers from a debilitating knob jitter issue. Continue reading “Quasimidi Polymorph (#3) – our Polymorph repair and rebuild service”

Korg Electribe ESX-1, continued

A few weeks ago I wrote about a “job” I did on one of my own pieces of gear, my Korg Electribe ESX-1. After replacing the pots (explained in previous post) and feeling so hopeful for my Electribe’s future, I later realized the biggest problem that causes the Electribe controls to jitter is NOT the pots themselves as it so often is with other pieces of gear, but rather induced electrical noise from the circuit board underneath affecting the voltages being sent to the A/D circuitry by the pots. Continue reading “Korg Electribe ESX-1, continued”

Korg Electribe ESX-1

“Really, that guy?”: the Korg Electribe ESX-1

UPDATE 8/28: As it turned out, the work described below did not fix the problem with the Electribe. If you are having a problem with jittery knobs and value jumping of your Electribe’s controls, please refer to my later post on the topic for the actual solution!

Just as they say “the cobbler’s children have no shoes,” so also do they say “the synth tech’s gear has 14 jittery knobs and isn’t even screwed together.” I decided to “treat myself” to a couple hours spent working on one of my own instruments yesterday and as a result I probably now have the best-working Korg Electribe ESX-1 in the universe. Continue reading “Korg Electribe ESX-1”

Quasimidi Polymorph – knob jitter hell

Quasimidi Polymorph
Quasimidi Polymorph

The unapologetically boring-looking Quasimidi Polymorph is a very powerful VA polysynth from the early 2000s that allows you to sequence and play back 4 parts on 4 different synth sounds, recording and playing back all the parameter edits you make along the way, and send them out on 4 individual outputs.  So basically it is 4 sequencing polysynths in one.  Continue reading “Quasimidi Polymorph – knob jitter hell”